제조사 | EKSPLA UAB |
---|---|
가격 | TBD |
문의 | 02-3461-1103 |
NT270 series tunable laser systems integrates into a single compact housing a nanosecond Optical Parametric Oscillator (OPO) and Diode-Pumped Solid–State (DPSS) Q-switched pump laser.
Diode pumping enables fast data acquisition at high pulse repetition rates up to 1 kHz while avoiding frequent flashlamp changes that are common when flashlamp pumped lasers are used. The pump lasers do not require water for cooling, thus further reducing running and maintenance costs.
All lasers feature motorized tuning across the specified tuning range. The output wavelength can be set from control pad with backlit display that is easy to read even while wearing laser safety glasses. Alternatively, the laser can be controlled also from personal computer through USB (RS-232 is optional) interface using supplied LabVIEW™ drivers.
High conversion efficiency, stable output, easy maintenance and compact size make our systems excellent choice for many applications.
Model | Feature |
---|---|
NT277 | High pulse repetition rate OPO producing tunable output in 2500 – 4475 nm spectral range |
NT277-XIR | Tunable output from NIR to far-IR range, 2500 nm to 12 000 nm |
Model | NT277 | NT277-XIR |
---|---|---|
OPO 1) | ||
Wavelength range | ||
Idler | 2500 – 4475 nm | 2500 – 4475 nm 4500 – 12000 nm 2) |
Pulse energy 3) | ||
Idler | 80 μJ at 3000 nm | 80 µJ at 3000 nm 20 µJ at 7000 nm |
Pulse repetition rate | 1000 Hz | |
Linewidth 4) | <10 cm-1 | <12 cm-1 |
Tuning resolution 5) | ||
Idler | 1 cm⁻¹ | |
Polarization | ||
Idler | vertical | horizontal |
Typical beam diameter 6) 7) | 4 mm | |
PUMP LASER | ||
Pump wavelength | 1064 nm | |
Max pump pulse energy 8) | 1.9 mJ | |
Pulse duration 9) | <10 ns | |
Beam quality | fit to Gaussian >90% | |
Pulse energy stability (StdDev) | < 0.5 % | |
PHYSICAL CHARACTERISTICS | ||
Unit size (W × L × H) | 305 × 701 × 270 mm | |
Power supply size (W × L × H) | 365 × 395 × 290 mm | |
Umbilical length | 2.5 m | |
OPERATING REQUIREMENTS | ||
Cooling | air | |
Room temperature | 18 – 27 °C | |
Relative humidity | 20 – 80 % (non-condensing) | |
Power requirements | 90 – 240 V AC, single phase 50/60 Hz | |
Power consumption | < 0.5 kVA |
Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.