Electronics
PCD-UHV series
OEM Pockels Cell Driver
HV pulse amplitude up to 5.6 kV
HV repetition rate up to 10 kHz
HV pulse duration down to 15 ns
HV pulse amplitude doubling layout
HV repetition rate up to 10 kHz
HV pulse duration down to 15 ns
HV pulse amplitude doubling layout
| 제조사 | EKSPLA UAB |
|---|---|
| 가격 | TBD |
| 문의 | 02-3461-1103 |
제품 특징
PCD-UHV series
- HV pulse amplitude up to 5.6 kV
- HV repetition rate up to 10 kHz
- HV pulse duration down to 15 ns
- HV pulse amplitude doubling layout
Features
- HV pulse amplitude up to 5.6 kV
- HV repetition rate up to 10 kHz
- HV pulse duration down to 15 ns
- HV pulse amplitude doubling layout
- Easy integration with HV power supply
- Switchable one/two trigger pulses control mode
Specifications
| Operation regime 1) | 4.2 kV mode | 5.6 kV mode |
|---|---|---|
| High voltage (HV) pulse amplitude to cell | 4.2 kV | 5.6 kV |
| Output polarity | bipolar | |
| HV pulse rise time, typical | 7 ns | 8 ns |
| HV pulse fall time, typical | 7 ns | 8 ns |
| HV pulse duration | 30-3000 ns | |
| Maximal HV pulse repetition rate | 10 kHz | 5 khz |
| External triggering pulse amplitude requirement | 3.5-5 V (50 Ω load) | |
| External triggering pulse rise & fall time | < 5 ns | |
| HV pulse delay | 30 ns | |
| External powering requirements: | ||
| HV power supply 2) | ≤ 2.1 kV, 5 W | ≤ 2.8 kV, 5 W |
| low voltage DC supply, switchable | 15-25 V, 150 mA or 12 V, 220 mA (0.5 A inrush current) | |
| Dimensions ( L x W x H): | ||
| driver board | 135 x 65 x 25 mm | |
| driver board mounted with HV05Wm power supply | 135 x 65 x 55 mm | |
- Specifications are subject to changes without advance notice.
- Typical voltage control limits for HV05Wm are 1.8 to 2.8 kV. Other limits are available on your request.
